Outside Taps

Fitting an outside tap involves installing a water supply outlet on the exterior of a building. It allows for easy access to water for gardening, car washing, outdoor cleaning, and other activities.


Steps to Install an Outside Tap

🔧 1. Choose the Location

  • The tap is usually installed near an indoor water supply (e.g., kitchen or utility room).
  • Ensure the location has proper drainage and is easily accessible.

🔧 2. Turn Off the Water Supply

  • Shut off the main water supply before starting the installation.

🔧 3. Drill a Hole Through the Wall

  • A hole is drilled through the exterior wall to pass the pipe from inside to outside.

🔧 4. Install a Pipe and Isolation Valve

  • A copper or plastic pipe is connected to an indoor water source.
  • An isolation valve is added to control water flow to the outside tap.

🔧 5. Fit a Non-Return Valve

  • This prevents backflow, stopping water from flowing back into the main supply.

🔧 6. Secure the Tap to the Wall

  • The outside tap is fixed using a mounting plate and secured with screws.

🔧 7. Connect and Test

  • The pipe is connected to the tap, and the water is turned back on.
  • Check for leaks and ensure the tap works properly.

Why Install an Outside Tap?

✔ Makes watering the garden easier 🌱
✔ Convenient for washing cars, patios, and pets 🚗🐶
✔ Saves time and effort compared to using indoor taps


Things to Consider

  • Frost Protection ❄ – Use an insulated tap cover or a frost-proof tap to prevent freezing in winter.
  • Water Pressure 💧 – Ensure good water flow; a professional can help adjust pressure if needed.
  • Regulations 📜 – Some areas require non-return valves to prevent contamination of drinking water.
➤